Step 1: Install your OBD2 software (if you don't have it — checkout TOAD OBD software).Do NOT launch it yet. Step 2: Connect ELM327 USB to your computer and car's OBD port (usually underneat dashboard/steering wheel). Step 3: Place the key in the ignition and turn it forward to 'ON' position.(Position where all dashboard lights are on. This is one position before engine starts.). Installation: 1. Load CD, Install the software of your choosing first, connect the ELM into the car OBD2 socket under dash (Your car needs to be in ignition on position). Please note some of the softwares are demo and some freeware. Step 1: Install your OBD software. Don't launch it yet. Step 2: Connect the cable to your computer and car. Step 3: Place the key in the ignition and turn it forward to the 'ON' position. (Position where all dashboard lights are on. It's one position before engine starts.) Step 4: Launch your OBD software.
ELM327 scanner software driver ISO free download on Mega
How To Install Elm327 Software Windows 7
-Contributor: www.uobdii.com engineer
Elm327 Interface Software
-No pass
-Security: safe to use
-Works on: computer XP WIN7 OK; Android and IOS depends on the hardware compatibility.
– Works on all ELM327 scanners.
Worth to read: Which elm327 OBDII scanner to buy?
How to install ELM327 scanner
- Pleaseuntil you connect the ELM327 with the car, then put the USB interface of ELM327 into the laptop.
- Connect the 16 pin connector of ELM327 with the car's 16 pin connector.
- Start the laptop and connect the USB of ELM327 to the laptop.
- Install the software, put the CD into the laptop and begin install it. After proper install, you will saw an icon of scan tool. (If the CD is blank, download the software I offer in the first paragraph.)
- Turn the car's ignition on.
- start the power of the car, you can see the light shining, it means the connect has succeed.
- Click 'my computer' begin the set of characteristic. Click the right button of your mouse, choose' characteristic'.
- At the 'hardware', please choose 'Device Manager', to set the comport. At the 'USB
Serial port' click the right button of mouse, choose 'characteristic', choose 'comport set up'
choose 'baud rate to 9600. In the comport set up, choose 'advanced', you can choose
from comport 1 to comport 8.anyone is ok, and then click enter. The set up of computer is
complete.
- Double click the icon of 'Scan Tool' on the desktop, click 'Sensor Data'
10.you will see a window not, pls choose 'ignore'
Elm327 Gm Software
11.in the option, please choose the same comport as previous setting. Choose the barate to 38400 and save it. Then you can read the data.
Related posts:
The OBDResource FORScan Pro and FORScan Pro ELM327 USB harwares are very easy and simple to modify your Ford cars hidden functions, powerful function including diagnosis and coding your whole ECU modules of the car.
Step 1: Install your OBD2 software (if you don't have it — checkout TOAD OBD software).Do NOT launch it yet. Step 2: Connect ELM327 USB to your computer and car's OBD port (usually underneat dashboard/steering wheel). Step 3: Place the key in the ignition and turn it forward to 'ON' position.(Position where all dashboard lights are on. This is one position before engine starts.). Installation: 1. Load CD, Install the software of your choosing first, connect the ELM into the car OBD2 socket under dash (Your car needs to be in ignition on position). Please note some of the softwares are demo and some freeware. Step 1: Install your OBD software. Don't launch it yet. Step 2: Connect the cable to your computer and car. Step 3: Place the key in the ignition and turn it forward to the 'ON' position. (Position where all dashboard lights are on. It's one position before engine starts.) Step 4: Launch your OBD software.
ELM327 scanner software driver ISO free download on Mega
How To Install Elm327 Software Windows 7
-Contributor: www.uobdii.com engineer
Elm327 Interface Software
-No pass
-Security: safe to use
-Works on: computer XP WIN7 OK; Android and IOS depends on the hardware compatibility.
– Works on all ELM327 scanners.
Worth to read: Which elm327 OBDII scanner to buy?
How to install ELM327 scanner
- Pleaseuntil you connect the ELM327 with the car, then put the USB interface of ELM327 into the laptop.
- Connect the 16 pin connector of ELM327 with the car's 16 pin connector.
- Start the laptop and connect the USB of ELM327 to the laptop.
- Install the software, put the CD into the laptop and begin install it. After proper install, you will saw an icon of scan tool. (If the CD is blank, download the software I offer in the first paragraph.)
- Turn the car's ignition on.
- start the power of the car, you can see the light shining, it means the connect has succeed.
- Click 'my computer' begin the set of characteristic. Click the right button of your mouse, choose' characteristic'.
- At the 'hardware', please choose 'Device Manager', to set the comport. At the 'USB
Serial port' click the right button of mouse, choose 'characteristic', choose 'comport set up'
choose 'baud rate to 9600. In the comport set up, choose 'advanced', you can choose
from comport 1 to comport 8.anyone is ok, and then click enter. The set up of computer is
complete.
- Double click the icon of 'Scan Tool' on the desktop, click 'Sensor Data'
10.you will see a window not, pls choose 'ignore'
Elm327 Gm Software
11.in the option, please choose the same comport as previous setting. Choose the barate to 38400 and save it. Then you can read the data.
Related posts:
The OBDResource FORScan Pro and FORScan Pro ELM327 USB harwares are very easy and simple to modify your Ford cars hidden functions, powerful function including diagnosis and coding your whole ECU modules of the car.
I share my experience with your guys of how to use both hardware to work with FORScan software, just 3 steps you will get it!
STEP1: Install the FORScan software and CH340 USB driver
If you are not very clear how to install the software, please read THIS BLOG>>.
STEP2: Configration the FORScan software (FORScan Pro Hardware)
How To Install Elm327 Software Updater
After plug in the FORScan Pro to laptop via USB, attach the OBDII adaptor to car OBDII port. Then run the FORScan software. Choose Settings (Gear icon) — Connection — MS CAN Support — RTS Relay
If you using FORScan ELM327 USB with switcher, NO need modify anything in software.
Related Post